Power Quality

PQ Synergy tm 2010 Bangkok, Thailand September 27th, 28th and 29th 2010

NEW!!   SMART GRID ASIA    NEW!!

 Member IEEE, AFE, Chamber of Commerce, Western Electric Power Institute

Home | Locations | Power Quality Profile  | More About Us | Products | Power Quality Training | Power Quality Request Form

UPS battery

Battery Center

UPS, Wheelchair, Scooters, Alarms

UPS Battery

The Reliable Power Recorder

It has everything you need.

Only the Power Recorder gives you all these instruments
in one portable, 13 pound package:

Recording RMS Voltmeter/Ammeter * Data Logger * Chart Recorder * Power Quality Analyzer * Power Disturbance Analyzer * Transient Analyzer * Power Demand Analyzer * Power Consumption Analyzer * Flicker Meter * Frequency Meter * 9-Channel Oscilloscope * Harmonics Analyzer * Ground Current Monitor * Fault Recorder

 

Contents:

 Key Features
  1. 4 voltage channels for all single phase, three phase wye and three phase delta systems
  2. 5 full time current channels to monitor currents on all phase, neutral and ground conductors simultaneously
  3. Lightweight, rugged, compact, 12" x 8", 13 lbs
  4. Ethernet port for high speed transfer of data to your IBM compatible PC at 1,000,000 BPS
  5. Internal memory: 4MB RAM, and 2GB hard disk
  6. Internal digital processor simultaneously measures RMS, consumption, and power disturbances on every cycle

Back to Top

Perfect for Any Application

  • Industrial/utility/commercial studies
  • Portable troubleshooting tool
  • Permanently installed monitor
  • Use in any environment, indoors and outdoors
  • Use on any SIZE load, from small motors or computers to entire buildings or facilities

Back to Top

Only the Power Recorder Offers Full Disclosure Technology

  • Power Quality, Consumption, and Harmonics are measured simultaneously
  • Voltage and current waveforms are captured and displayed simultaneously
  • Every cycle is measured, nothing is missed,
  • Accuracy is typically 0.5% of full scale
  • All systems are on-line when installed and function 100% of the time
  • No need to turn one measurement off to enable another
  • Unique software algorithms prevent memory from becoming saturated
  • Learn more about the unique benefits of Full Disclosure

Back to Top

Power Recorder Specifications

  • Number of channels:
 9 (4 voltage, 5 current)
  • Voltage range:
 0 - 707 volts RMS, 1000 volts peak
  • Voltage resolution:
 14 bits, 90 millivolts
  • Voltage accuracy:
 < 1% fs, 0.5% typical
  • Sampling frequency:
 7.8 KHz, 128 samples per cycle
  • RMS response time:
 1 cycle
  • Frequency measurement:
 45 - 65 Hz, resolution 0.0 Hz
  • Impulse sampling frequency:
 2 - 4 MHz
  • Impulse range:
 100 - 6400 volts peak
  • Impulse resolution:
 10 bits, 12 volts
  • Impulse accuracy:
 5% FS
  • Harmonic measurement:
 0 - 63rd harmonic, phase angle, magnitude
  • Flicker measurement:
 0.01 Hz to 30 Hz to IEC standard 868
  • Internal microprocessors:
 486,  DSP
  • Internal memory:
 1 MB cache, 4 MB RAM, 2GB hard disk
  • Event memory:
 6000 simultaneous voltage and current events
  • Thresholds:
 Automatic, adaptive to activity
  • Communications:
 10-Base-T Ethernet, RJ 45 connector (standard)
Parallel (optional)
  • Operating power:
 85 - 264 VAC, 47 - 440 Hz, 120 - 370 VDC, 40 VA
  • Environmental:
 0 - 50 C, 32 -122 F, 100% RH non-condensing
  • Enclosure:
 Rugged, drip-proof (standard)
Weatherproof, hostile environment (optional)
  • SIZE:
 8.5" x 12" x 3", 21.25 cm x 30 cm x 7.5 cm
  • Weight:
 13 lbs., 6 Kg
  • Certifications:
 FCC, UL, CSA, CE

Back to Top

Copyright 4 June 1997. All rights reserved.
Reliable Power Meters

Information in this document is subject to change without notice.

 

Home | Locations | More About Us | Products | PQFAQs  | Power Quality Request Form

Last Revised 08/17/10 - 1998 Power Quality Inc. -  All rights reserved

email.gif (25129 bytes)

 info@powerquality.org

We gladly accept